User Tools

Site Tools


bandwidth_allocation50

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
bandwidth_allocation50 [2019/02/12 15:49]
root
bandwidth_allocation50 [2020/03/15 21:18] (current)
zog
Line 1: Line 1:
-=====Bandwidth allocation=====+=====Bandwidth allocation.=====
  
 After choosing "​Add",​ you will see the bandwidth allocation settings window. In this window there are the following fields: After choosing "​Add",​ you will see the bandwidth allocation settings window. In this window there are the following fields:
  
-  *  Destination address+  * destination
-  *  Protocol+  * protocol
-  *  Port+  * port
-  *  Speed+  * speed
-  *  Priority+  * priority
-  *  Time +  * duration, 
-  *  The "​use ​the bandwidth ​allocation of a parent"​ checkbox;+  * the "​borrow ​bandwidth ​from parent"​ checkbox;
  
-{{bandwidth.jpg}}+{{:​user_width1.jpg?|}}
  
-You can check what values are acceptible ​when you place the cursor ​on the field, or you can choose a value from the drop-down list containing the objects that are already known to ICS CUBE. Bandwidth allocation is a QoS (quality of service) tool, it is used, for example, ​to reserve a communication channel, for example, for qualitative ​IP-telephony the necessary bandwidth allocation and IP-telephony ports need to be set up, and the rule should be assign to approptiate ​users.+You can check which values are acceptable ​when you place the cursor ​over the field, or you can choose a value from the drop-down list containing the objects that are already known to ICS CUBE. Bandwidth allocation is a QoS (quality of service) tool. It is used to reserve a communication channel, for example, for reliable ​IP-telephony the necessary bandwidth allocation and IP-telephony ports need to be set up, and the rule should be assign to appropriate ​users.
  
-When you mark the "use the bandwidth ​allocation of a parent" ​checkbox, traffic set in the rule, can use bigger bandwidth then it's set in the rule, if the channel is free.+When you mark the “borrow ​bandwidth ​from parent” checkbox, traffic set in the rule, can use bigger bandwidth then it is specified ​in the rule, if the channel is unoccupied. 
 + 
 +The “priority” field works when the channel is overloaded: the most prioritized traffic goes first. 
 + 
 +**Important:​** for ICS CUBE version 6 this rule is compatible with the following list of network interface card drivers: 
 +ae, age, alc, ale, an, ath, aue, axe, bce, bfe, bge, bxe, cas, cxgbe, dc, de, ed, em, ep, epair, et, fxp, gem, hme, igb, ipw, iwi, ixgbe, jme, le, msk, mxge, my, nfe, nge, npe, qlxgb, ral, re, rl, rum, sf, sge, sis, sk, ste, stge, ti, txp, udav, ural, vge, vr, vte, wi, xl.
  
-The "​priority"​ field works when the channel is overloaded: the most prioritized traffic goes first. 
  
  
bandwidth_allocation50.1549975772.txt.gz · Last modified: 2019/02/12 15:49 by root