This is an old revision of the document!
After the installation, you can open the web-interface from any computer from your local network. Just enter the ip-address, that you specified during the installation, and the port 81 (<ip:81>) in a browser.
We recommend to use Mozilla Firefox or Google Chrome.
After entering the IP-address, you will see the login form.
When first entering web-interface, use login root and password 00000 (five zeros in a row).
Attention! We strongly recommend to change administration password right after you enter the system for the first time. Otherwise strangers will have access to the ICS CUBE control panel.
Also, in the login form you can find the links to the web-interface of the mail server, Captive portal authorization page, web-softphone and authorization utility.
The web-interface itself is divided into two parts. Left sidebar contains grouped list of system modules, and in the right part will be the menu of the chosen module.
There is a set of custom widgets (“Users”, “Statistics”…..) in the module window on ICS CUBE main page.
Some of widgets are hidden. All of widgets can be hiding / adding to the main page, you able to change their size and move them through the menu. For adding a widget you need to press on pencil button in the lower left corner. Editing mode will switch on.
Bar with the list of all available widgets and button of initial widget settings recovery will open on the lower part of windows. Displayed widgets on a main menu will highlighted in this bar. In adding widget it will also added to lower part of window. For deleting widget from main page you need to: 1) press on recycle bin next to corresponding widget; 2) press to corresponding widget button in lower bar; 3) seize and move widget to lower bar.
New dialog window where can be specified widgets width and height will be opened in widget editing mode. The set values are indicated in the number of cells. The maximum width is 36 cells, which corresponds to the size of the displayed grid, and the maximum height of one widget is 3600 cells.
Important to note that change the widget size is available in case of enough free space. The widget size will be calculated from the upper left corner of widget current location. If you need to increase the widget, but there is not enough free space you should move widget down and set up it size. In the mobile form, widgets are arranged vertically one after another, changing widgets location and size is not possible.
|Widget||Information||Available actions||Where it leads||Linked services|
|Users||General amount of active, blocked and disabled users||Add a user, import users||Users, Roles, Connections monitor||-|
|Statistics||The amount of ingoing and outgoint traffic per current day, week and month||Turn statistics service on/off (Statistics, Counters)||Reports||Statistics, counters, proxy server|
|Category Reports||Display the summary information about recognized traffic categories for the current day||-||Reports (Traffic categories)||-|
|Security and access control||The amount of committed attacks and discovered viruses||Turn security system on/off (Firewall, proxy server, HTTP-traffic filter)||Rulesets, traffic categories, Firewall (rules), Proxy (settings)||Firewall, proxy server, HTTP-traffic filter, DNS-server, Suricata attack detector, Antivirus proxy server, DLP, content filter|
|Providers and networks||Default provider, ping to the default gateway, average workload of the interface, the amount of VPN-connects||To initiate the network setup wizard||Providers and networks, VPN (Users), report management (interfaces report), network tools||-|
|Mail server||The amount of worked letters (sent, received, marked as spam, detected viruses)||Turn mail services on/off (mail server, mail storage, mail collector, antispam SpamAssassin); add a mailbox||Mail: main page, domains and mailboxes, filters, address book, mail queue, statistics||Mail server, mail storage, mail collector, antispam SpamAssasin, DNS-server, catalogues server, DKIM-signature service|
|Web and file server||The amount of virtual hosts, the remaining disk space||Turn the file server on/off (web-server, ftp-server, network neighborhood); add a virtual host, add a hard drive||File storage, Web (web-resources), FTP (ftp-resources), network neighborhood (identification)||Web-server, FTP-server, network neighborhood, DNS-server|
|IP telephony||Number of external channels, phone numbers, faxes||Turn the telephony service on/off; add phone number; add fax||Telephony service (phone numbers, rules, call log)||Telephony service, DNS-server|
|Monitoring and maintenance||CPU load, memory load, system load, remaining time until the end of a trial period (if the system is not activated)||Turn system monitoring on/off, create a backup||Monitoring, Updates, Date and time, System log||System monitoring, System notifications|
|Sites feed||Shows the last registered site visits||-||Reports (users activity)||-|
|Search feed||Shows the last registered requests in search engine||-||Reports (search engine feed)||-|
|Events||Shows the last system events from the syslog||-||Log and notifications (System log)||-|
All widgets show information in real-time.
After the first entrance to the web-interface the Network setup wizard should be performed.