This is an old revision of the document!
To install ICS CUBE you need to download image of installer CD from the official product website. Download page is located at this address: https://icscube.com/download/. Image size is around 400 MB. After downloading you need to burn this image onto a CD.
After downloading the image you need to burn it onto a CD. You can do that with virtually any program for burning compact disks, such as Nero Burning ROM, Alcohol 120%, CDBurnerXP, UltraISO, etc.
Warning! Burning .iso-image onto a CD must be done in “burn image” mode. After the file is burned onto the CD, you need to boot from it on the computer where you want to install ICS CUBE.
You will need a computer with two network cards, hard disk with a capacity of at least 40 GB and CD-ROM drive. To boot from the installer CD you need to “switch on” the option to boot from CD in BIOS.
After booting from the installer CD, you should see the following message:
After that the setup program will run. You will need to accept the license agreement, choose network interface for future ICS CUBE configuration and define hard drive for installation.
Note: use TAB for options switching when in installation mode.