User Tools

Site Tools


network_wizzard_50

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
network_wizzard_50 [2019/02/12 16:16]
root
network_wizzard_50 [2020/02/25 21:11] (current)
zog
Line 6: Line 6:
 After first successful [[:​gui50|Login to web-interface]] it is necessary to configure essential parameters and network interfaces of ICS CUBE. It is possible using initial system configuration wizard. On first login it starts automatically. After first successful [[:​gui50|Login to web-interface]] it is necessary to configure essential parameters and network interfaces of ICS CUBE. It is possible using initial system configuration wizard. On first login it starts automatically.
  
-{{en50-ics-wizard0.png?700|}}+{{:netmaster1.png?|}}
  
-Wizard is step-by-step guide for system configuration. It will ask you to specify name of your company, host name and login/​password of administrator.+Wizard is step-by-step guide for system configuration. It will ask you to specify ​the name of your company, host name and login/​password of administrator.
  
-{{en50-ics-wizard2.png?700|}} +{{:netmaster2.png?300|}} 
-{{en50-ics-wizard3.png?700|}} +{{:netmaster7.png?300|}} 
-{{en50-ics-wizard4.png?700|}}+{{:netmaster8.png?300|}}
  
-After completion of initial steps ICS CUBE will display the table of all applied ​changes. Please confirm, by pressing "​Finished"​.+After completion of initial steps ICS CUBE will display the table of all changes ​to be applied. Please confirm, by pressing "​Finished"​.
  
 =====Network settings wizard===== =====Network settings wizard=====
  
-During the first login to web-interface,​ "​Firewall"​ module has settings ​"not configured"​. +During the first login to web-interface,​ "​Firewall"​ module has "not configured" ​settings
-Initial settings are considered finalized when "​Firewall"​ module is having status ​enabled. ​  In order to achieve this it is necessary that at least one network interface "​Provider"​ and one of "Local Network"​ been created in "​Providers and Networks"​. It is recommended to start network wizard for initial configuration of network interfaces.+Initial settings are considered finalized when "​Firewall"​ module is in enabled ​status.   In order to achieve this it is necessary that at least one network interface "​Provider"​ and one of "Local Network" ​has been created in "​Providers and Networks"​. It is recommended to start network wizard for initial configuration of network interfaces.
  
  
 ==== Types of network interfaces ==== ==== Types of network interfaces ====
  
-During the first step of wizard all found network interfaces ​will be displayed. For each one of them you need to specify ​type.+During the first step the  ​wizard ​will display ​all found network interfaces. For each one of them you need to specify ​its type.
  
-{{en50-ics-wizard5.png}}+{{:netmaster5.png?|}}
  
 **Possible types:** **Possible types:**
Line 34: Line 34:
 |Local network VLAN|Works in the same way as the usual local network but using VLAN technology. Allows creating multiple virtual local networks on one physical interface.| |Local network VLAN|Works in the same way as the usual local network but using VLAN technology. Allows creating multiple virtual local networks on one physical interface.|
 |Provider|External server interface with statically configured IP address.| |Provider|External server interface with statically configured IP address.|
-|Provider PPPoE|External server interface connecting to the server ​through PPPoE protocol.|+|Provider PPPoE|External server interface connecting to the ISP through PPPoE protocol.|
 |Provider DHCP|External server interface with dynamic IP address received from provider’s DHCP server.| |Provider DHCP|External server interface with dynamic IP address received from provider’s DHCP server.|
-|Provider VLAN|External server interface with statically configured IP address and ID VLAN-subnet to which it is connected.| +|Provider VLAN|External server interface with statically configured IP address and VLAN ID of the subnet to which it is connected.| 
-|DMZ network|Internal server interface. This network can have corporate servers with external ​IP addresses. This kind of network configuration is done to increase servers’ security and limiting ​the level of access to them with the help of firewall.|+|DMZ network|Internal server interface. This network can have corporate servers with externally reachable ​IP addresses. This kind of network configuration is used to increase servers’ security and limit the level of access to them with the help of firewall.|
 |PPTP provider over IP|External server interface connected to provider through PPTP protocol with statically configured IP address in “gray” network of provider.| |PPTP provider over IP|External server interface connected to provider through PPTP protocol with statically configured IP address in “gray” network of provider.|
-|PPTP provider over DHCP|External server interface connected to provider through PPTP protocol with dynamic IP address in “gray” ​network of provider received from provider’s DHCP server.|+|PPTP provider over DHCP|External server interface connected to provider through PPTP protocol with dynamic IP address in private ​network of provider received from provider’s DHCP server.|
 |DMZ network VLAN|Internal server interface. Same as DMZ network except VLAN ID parameter.| |DMZ network VLAN|Internal server interface. Same as DMZ network except VLAN ID parameter.|
  
-**Important:​ 3G and Wi-Fi providers ​are needed ​to be created separately as they are not displayed in the list of interfaces by wizard.**+**Important:​ 3G and Wi-Fi providers ​need to be created separately as they are not displayed in the list of interfaces by the wizard.**
  
 In our example, interface le0 will remain as local network and interface le1 will be configured as simple provider. In our example, interface le0 will remain as local network and interface le1 will be configured as simple provider.
 ==== Configuring local network ==== ==== Configuring local network ====
  
-During the next step, wizard will ask you to enter the local network parameters. If necessary it’s possible to specify MAC-addresses of interface and configure interface to distribute addresses to local hosts through DHCP protocol by defining the range of distributed addresses.+During the next step, the wizard will ask you to enter the local network parameters. If necessary it’s possible to specify MAC-addresses of the interface and configure interface to distribute ​IP addresses to local hosts through DHCP protocol by defining the range of distributed addresses.
  
-{{en50-ics-wizard6.png}}+{{:netmaster6.png?|}}
  
-**Warning! Instead of entering network mask in a separate box, in ICS CUBE you have to enter IP address with network’s prefix in the format IP address/​prefix.**+**Warning! Instead of entering network mask in a separate box, in ICS CUBE you have to enter IP address with network prefix in the format ​of IP address/​prefix.**
  
 **Network mask to prefix conversion table:** **Network mask to prefix conversion table:**
Line 66: Line 66:
 |255.255.255.255|/​32| |255.255.255.255|/​32|
  
-You can also define the ranges of addresses in the format IP address: mask. For example, address ​in local network ​of ICS CUBE could be entered as 192.168.17.123:​255.255.255.0.+You can also define the ranges of addresses in the format IP address: mask. For example, address of ICS CUBE in your local network ​could be entered as 192.168.17.123:​255.255.255.0.
  
 ==== Configuring provider ==== ==== Configuring provider ====
  
-Next it is necessary to configure ​provider. In order to do that you need to enter address and prefix of the network, gateway address and DNS server address (one or two).+Next it is necessary to configure ​your provider. In order to do that you need to enter address and prefix of the network, gateway address and DNS server address (one or two).
  
-{{en50-ics-wizard7.png}}+{{:netmaster7.png?|}}
  
 Network mask for provider has to be entered in the same format as during the previous step: either address/​prefix or address: mask. Network mask for provider has to be entered in the same format as during the previous step: either address/​prefix or address: mask.
-In the case when there is more than one provider you can set priority for each [[сетевые интерфейсы#​приоритеты провайдеров|priority]].+In the case when there is more than one provider you can set priority for each [[сетевые интерфейсы#​приоритеты провайдеров|priority]].
 ==== Completing the wizard ==== ==== Completing the wizard ====
  
-The last page of the network setup wizard will display all the input parameters. ​+The last page of the network setup wizard will display all the parameters ​to take effect
  
-{{en50-ics-wizard8.png}}+{{:netmaster8.png?|}}
  
 You need to click “ok” and network setup wizard will apply the new configuration and open module of network interfaces. You need to click “ok” and network setup wizard will apply the new configuration and open module of network interfaces.
  
-{{en50-ics-wizard9.png}}+{{:netmaster9.png?|}}
  
  
-**Important:​ If you lose an access to web-interface after completion of the Wizard, please check if local area network is present in the field "​Access through web" in the settings of Firewall. It should contain all the networks, which are used to connect to web interface. If you change subnet of the local interface, please specify it.**+**Important:​ If you loose access to web-interface after completion of the Wizard, please check if local area network is present in the field called ​"​Access through web" in settings of Firewall. It should contain all the networks, which are used to connect to ICS CUBE web interface. If you change subnet of the local interface, please specify it.**
  
-If you unsure what is the best way to integrate ICS CUBE in your network, please check several [[en:​scenarios|standard ICS CUBE installation scenarios]]+If you are unsure what is the best way to integrate ICS CUBE in your network, please check several [[en:​scenarios|standard ICS CUBE installation scenarios]]
  
 After network configuration you can start creating users. [[создание пользователей|Users creation]]. After network configuration you can start creating users. [[создание пользователей|Users creation]].
  
network_wizzard_50.1549977408.txt.gz · Last modified: 2019/02/12 16:16 by root