User Tools

Site Tools


pipe50

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
pipe50 [2019/02/12 15:39]
root
pipe50 [2020/03/15 19:12] (current)
zog
Line 1: Line 1:
-=====Speed limitation=====+=====Speed limitation.=====
  
-After choosing "​Add",​ you will see the speed limitation ​settings window. In this window there are the following fields:+After choosing "​Add",​ you will see the speed limit settings window. In this window there are the following fields:
  
-  *  Direction+  * direction
-  *  Destination address+  * apply
-  *  Protocol+  * destination
-  *  Port+  * protocol
-  *  Speed+  * port
-  *  Turn on after (HTTP/​HTTPS ​only), the "restrict ​to ICS CUBE" checkbox, object.+  * speed, 
 +  * duration, 
 +  * apply after (only for HTTP/​HTTPS), ​ 
 +  * the "limit to ICS" checkbox.
  
-{{speed_limit.jpg}}+{{:user_pipe.png?|}}
  
-You can check what values are acceptible ​when you place the cursor ​on the field, or you can choose a value from the drop-down list containing the objects that are already known to ICS CUBE. There is three ways this rule can be implemented (depending on the object): +You can check which values are acceptable ​when you place the cursor ​over the field, or you can choose a value from the drop-down list containing the objects that are already known to ICS CUBE. There is three ways this rule can be applied ​depending on the object it is applied to:
-|Way|Action| +
-|To an object|Will be applied to a group or a user. With this implementation,​ each group (even if it contains sub-groups in it) will have the speed limitation, that is set in the rule.| +
-|To every user|Will be applied to a group or a user. With this implementation,​ each user, including users in groups, will have the speed limitation, that is set in the rule. | +
-|To every ip|Will be applied to a group or a user. With this implementation,​ each ip-address that user has, including users in groups, will have the speed limitation, that is set in the rule. |+
  
-If the "restrict ​to ICS CUBE" checkbox is marked, the rule will also count connections, income ​to ICS CUBE (for example, access to the ftp or web-interface). +|Way|Result| 
 +|To object|Will be applied to a group or a user. With this way, each group (even if it contains sub-groups) will have the speed limitation, that is set in the rule.| 
 +|For each user|Will be applied to a group or a user. With this way, each user, including users in groups, will have the speed limitation, that is set in the rule. | 
 +|For each IP|Will be applied to a group or a user. With this way, each IP-address that user has, including users in groups, will have the speed limitation, that is set in the rule. | 
 + 
 +If the "limit to ICS" checkbox is marked, the rule will also count connections ​established ​to ICS CUBE (for example, access to the ftp or web-interface).
  
  
pipe50.1549975196.txt.gz · Last modified: 2019/02/12 15:39 by root