User Tools

Site Tools


routes50

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
routes50 [2020/03/11 16:05]
zog
routes50 [2020/03/16 21:14] (current)
zog
Line 13: Line 13:
 {{:​user_route.png?​|}} {{:​user_route.png?​|}}
  
-You can check what values are acceptable when you place the cursor ​on the field, or you can choose a value from the drop-down list containing the objects that are already known to ICS CUBE. The “Route” rule is using for routing traffic not only between ​the parts of the networks, but also to different ISPs. When setting the rule “through gateway” the IP-address of the gateway device must be set. Most often this rule is used when ICS CUBE is based on a server with one network interface.+You can check which values are acceptable when you place the cursor ​over the field, or you can choose a value from the drop-down list containing the objects that are already known to ICS CUBE. The “Route” rule is used for policy-based ​routing ​of traffic not only between ​internal ​networks, but also to different ISPs. When setting the rule “through gateway” the IP-address of the gateway device must be set. Most often this rule is used when ICS CUBE is deployed ​on a server with single ​network interface.
  
-When the checkbox “Do not process traffic with firewall” is marked, to this rule to all the traffic that goes through ICS CUBE, the firewall rules will not be applied. It should be noted, that if this checkbox isn'​t ​marked ​and TCP traffic goes through ICS CUBE, firewall will drop the connection after 30 seconds downtime.+When the checkbox “Do not process traffic with firewall” is ticked, to all packets matching ​this rule the firewall rules will not be applied. It should be noted, that if this checkbox isn'​t ​ticked ​and TCP is established ​through ICS CUBE, the firewall will drop the connection after 30 seconds downtime.
  
-When the rule “Through interface” is set, the route rule through one of the ICS CUBE network interfaces will be created.+When the rule “Through interface” is set, the rule to route traffic ​through one of the ICS CUBE network interfaces will be created.
  
-When the rule “Through provider” is set, the route rule through one of the ICS CUBE ISPs will be created.+When the rule “Through provider” is set, the rule to route traffic ​through one of the ICS CUBE ISPs will be created.
  
  
routes50.txt · Last modified: 2020/03/16 21:14 by zog